Sticker removal

[DSMissed]

If you are talking about the honda wing emblems, mine had clear coat over them too. I am wet sanding/buffing the edge off.

[Honda-biker]

if their is clear coat over them i agree wet sanding and buffing is your only option i believe,

[w0rM]

None of the one's I've seen have stickers under the clear coat.

[Antbanks]

Originally Posted by w0rM

Goo Gone is your friend

+1 ... I agree!..

[pampal]

Label Off is a product that does the same thing as goo gone

[RVOKNIO]

I hit the three stickers just behind the gas cap with a heat gun for 15 - 20 seconds and then peeled them off. A hairdryer will also work but may take a bit longer to loosen the stickers.
Then I buffed the residue with Goo Gone a couple of times and now you can't tell that there ever were stickers on the tank.

∞

[confedrbl]

I peeled the stickers off with my fingernails carefully. then used this

Turtle Wax - Turtle Wax Label & Sticker Remover

just let it set on the glue for about a minute or 2 then just rub it off with a washrag (do not use paper towels they just fall apart)

got it @ Advanced Auto for like 5$ but you could probably find it anywhere

[JessBlackCBR]

For any Aussies, I just peeled it off (I only had a warning sticker under the fuel cap) and used Eucalyptus oil to get the sticky bits off. Not sure if you other girls/guys have Eucalyptus oil?

[413]

I just peeled the front honda and sticker just under the fuel cap off
and with the sticky bits buffed it out with some Autoglym super resin polish

[northernlights]

Originally Posted by mikepalarchio

Peel the stickers off, dip a cloth into your tank, lightly rub the gasoline over your the glued residue, it should mostly come out, then use a cleaner to remove the gasoline before it can harm the paint, and throw a coat of wax on it, youll be good to go in about 5 minutes.

Thank you, I did mines this morning using this technique and it worked perfectly. No need to buy any kind of product and it looks like nothing was ever there.