Improvements.

[Aufitt]

Cost- $0

[lewiCBR250R]

if only i knew what that is

[Aufitt]

Originally Posted by lewiCBR250R

if only i knew what that is

Probably best not attempting it then lol.
The last pic is the AFTER.

I'll put up some more Aufitt budget improvements & setup tips.
I like to get the most out the least.

[SDM]

Looks like lot of people are getting bit by the mod bug, from simple to full blown. Thats good as most have different ideas and we can all learn something. Sometimes its the easy mods that we can increase the most performance out of.

Have you noticed an increase of flow from your muffler bearing?

[HMenke]

Kinda hard to tell what we're looking at - did you ream away a ridge in there that partly restricts exhaust flow?

[Aufitt]

Originally Posted by HMenke

Kinda hard to tell what we're looking at - did you ream away a ridge in there that partly restricts exhaust flow?

^Top of the class!

(@BBRMotorsports knows what I did there too)

20 mins with a die grinder and a half round file to reap the rewards of better response at high rpm and still have all the benefits of a std header.

[Aufitt]

1.062 kg

replaced with 100 grams of 3mm alloy
cost $3.

Exhaust hanger bracket.

[Aufitt]

879grams not including 4 mounting bolts.

Only 1kg but a very ugly place for weight.
also gives another 15mm bum room for taller riders to tuck.

Cost $0.

[Aufitt]

889grams not including mounting hardware.

Fender, fender frame and Numberplate light,
surplus to requirements, bad aero, and another ugly place for weight.

Make your own FE if needed.

Cost $0.

[Aufitt]

176grams




In WA, beeping means you want some serious road rage,
No beep beep for me thanks.

Cost $0.