Honda CBR250R Forum : Honda CBR 250 Forums - View Single Post - Racer Project
Thread: Racer Project
View Single Post
post #4 of Old 04-02-2019, 09:38 PM Thread Starter
bat's Avatar
Join Date: Apr 2014
Posts: 36
Thanks: 0
Thanked 1 Time in 1 Post
Alright, bike is done, ready to test and race. Bike is 311 lbs with gas ready to race. I still don't know how Ari got his 2011 down to 295 lbs. I know my chain is a little more weight than another 520 non "o" ring chain was. Everything is trimmed off frame. I did have to weld a bung on the exhaust for the Bazazz with Auto Tune. 305 kit with cams installed, slipper clutch installed with Factory Pro shift kit and Barnett springs. Do have a fork brace and installed Tyga upper clamp, Vortex clamp with Carbon Fiber bars, Woodcraft ignition delete, Sava race tires, Vortex sprocket. Started right up after build. I will run 110 Torco race fuel. I will take it out tomorrow and do a test. We have a race event this weekend. Sava just got back to me with cold and hot tire temp. I will let you know if it works.
bat is offline  
For the best viewing experience please update your browser to Google Chrome