some sound is coming from my engine,and i will post the youtube link of the video, its only 20sec, please hear with headset and help me and advise what should i do
no the oil changing has done properly, mechanic told me it might be Valve clearance or tensor problem. but just want to make sure if someone has this same issue.
no the oil changing has done properly, mechanic told me it might be Valve clearance or tensor problem. but just want to make sure if someone has this same issue.
Source of the noise could be the cam chain tensioner, as others have suggested. But I'd also have the valve clearance checked, and adjusted if clearance is found out of specification.
The sound is definitely something to do with the valve train. The first thing to check is the Cam Chain Tensioner. They are pretty cheap so I would just buy a new one test it out. Past that it could just be the valve clearance could be too much.
Has this sound started all of a sudden or has it gradually gotten louder?
Some people have had problems with the cam chain tensioners and some early models had a tendency to have their valve clearance out of specs though the latter one should have been corrected on the very first service after 1000km.
ok thanks.i will get the bike checked Tomorrow,
one more thing is at low throttle their is missing feeling,after that no problem.. any idea what is the problem?
ok thanks.i will get the bike checked Tomorrow,
one more thing is at low throttle their is missing feeling,after that no problem.. any idea what is the problem?
Easy thing to try would be to add a strong fuel system cleaner like Techron Concentrate (1oz per gal) to a full tank or 2.
That will clean the injector and also the intake valves and combustion chamber of deposits which can build-up and cause detonation and other issues.
I run it every year in the cycles after running my storage gas (with stabilizer) just to make sure the system stays clean. Also run it in each vehicle after the winter season when there is an overly rich mixture due to cold temps.
Probably the tensioner. Factory ones are noisy to begin with, then as they age they knock more and more. Mine got so bad I thought I had a bearing going. Replaced with some Lowes hardware and made it a manual adjustment; never had another issue.
Finally, someone from past 2015 to talk about this f@#ing engine rattle... hope you're talking about the bb's in a can sound like as you accelerate in gear.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Honda CBR 250 Forum
228.4K posts
21.1K members
Since 2011
A forum community dedicated to Honda CBR 250 owners and enthusiasts. Come join the discussion about performance, racing, modifications, troubleshooting, maintenance, classifieds, and more!