2016 parts for 2012
1 - 3 of 3 Posts
hi
I understand the 2016 model has early (2016 one cylinder) and later (2017 two cylinders). And there is a difference in the headlight, in the first models one headlight, in the later a twin of headlights. I guess there are more differences.
The forum here is for the 2011-2013 models(+2014 Europe model).
Try asking at your local Honda's garage, I'm sure they'll give you reliable information there.
According to the list of Honda CBR250R: review, history, specs - BikesWiki.com, Japanese Motorcycle Encyclopedia The difference may be mainly in the engine (single-cylinder versus two-cylinder), but I'm not sure.
You are also welcome to browse this list:
www.cbr250.net
I understand the 2016 model has early (2016 one cylinder) and later (2017 two cylinders). And there is a difference in the headlight, in the first models one headlight, in the later a twin of headlights. I guess there are more differences.
The forum here is for the 2011-2013 models(+2014 Europe model).
Try asking at your local Honda's garage, I'm sure they'll give you reliable information there.
According to the list of Honda CBR250R: review, history, specs - BikesWiki.com, Japanese Motorcycle Encyclopedia The difference may be mainly in the engine (single-cylinder versus two-cylinder), but I'm not sure.
You are also welcome to browse this list:
Genuine parts
Hi there new to the forum. I recently purchased a second hand cbr250rr which needs a lot of love and attention. Very limited knowledge but have managed to get the bike running after sitting for over a year. so now in the process of sorting out the wiring. My question is I need to replace the...
www.cbr250.net
Look up actual part# of model-years of parts you want to interchange. This site has good info and parts-diagrams with part#: https://cmsnl.com
I've successfully exchanged parts by just examining parts-diagram photos even if their part# are different. I used Photoshop to copy & paste photo of parts from one model to another to "test fit" the part.
I've successfully exchanged parts by just examining parts-diagram photos even if their part# are different. I used Photoshop to copy & paste photo of parts from one model to another to "test fit" the part.
1 - 3 of 3 Posts
