Honda CBR 250 Forum banner

Brake pedal height adjustment.

4479 Views 5 Replies 3 Participants Last post by  sendler
This one is not in the manual so I've made it simple for you all.

See less See more
  • Like
Reactions: 4
1 - 1 of 6 Posts
Also beware that if the adjuster doesn't seem to be working right, the upper 10 mm nut may have come loose also. This has caused confusion on the forum a few times. It is supposed to stay tight to lock the threaded rod into the piston of the master cylinder but both nuts came loose on mine so they were both just turning and no adjustment was happening. I had to carefully hold the threaded rod in the middle with some needle nose vise grips to retighten the upper nut first so that turning it would actually turn the threads in and out of the brake pedal at the bottom.
  • Like
Reactions: 2
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.