Honda CBR 250 Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
got an email from my wife that my order from motoability.com arrived the other day...

clip-ons


D3 grips


V1 bar ends


front sprocket


39T Aluminum rear sprocket


sprocket nuts


X-ring chain


reservoir sock


...can't wait to fly home :D
 

·
Registered
Joined
·
208 Posts
You know she's taunting you with those pics right? Almost like sending you nude photos of herself while your away from home.;) It just aint right.:(
 

·
Registered
Joined
·
389 Posts
What’s the plan with the sprockets? More torque or top end?
 

·
Registered
Joined
·
42 Posts
dj1, how did you get the stock rear sprocket off? I've tried and have succeeded to strip out the first two Allen heads I touched. It's a 6mm Allen head on the outside of the sprocket, and a 17mm nut on the inside. I can turn the 17mm nut, which turns the entire Allen head bolt. Trying to keep the 6mm Allen head from turning results in stripping it out :confused:

Update: I went ahead and drilled the heads off all six bolts.
 

·
Registered
Joined
·
10 Posts
Same boat here... I just ground them all off with an angle grinder, ******************** things were in there tight... There is virtually NO aftermarket for those bolts and is going to take nearly a week to get OEM bolts and nuts in hand... ANNOYING lol...
 
1 - 5 of 5 Posts
Top