Honda CBR 250 Forum banner

Help help help

1391 Views 16 Replies 4 Participants Last post by  Tamir
So I was doing an oil change and pulled the filter out and there was tons I mean tons of copper like material in the filter and the clutch cover case does anyone have any insight on what this could be from and how to fix it ?
1 - 1 of 17 Posts
How is the motor performing
It’s like a copper colored material and the bike was like falling on its face I’m not too sure what the issue is and I can’t get anymore pictures away from the bike sorry but it was a brass copper color non magnetic
So poor motor performance? Any unusual sounds? I bet your engine will require a rebuild. Those shavings will have been distributed throughout the motor during operation and cause more damage to other parts. The main bearing blew in my motor and I ended up replacing the entire motor because the internal damage was so extensive.
1 - 1 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.