Honda CBR 250 Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
My indicators all stopped working after a very wet road and lots of road water, they did temporarily start working now have died, everything else works and all fuses are fine.

When pressing indicators I can hear a fast ticking have now ordered a relay for the bike. Anything else it could be?
 

Attachments

·
Registered
Honda: INNOVA125i(2010); CBR250R(2013)
Joined
·
318 Posts
I can hear a fast ticking
When one of the bulbs is not connected or burned out, it changes the resistance on the electrical circuit of the winker relay and it works faster.
When the middle cowls (covers) is removed, the two front winkers are removed with it, this disconnection also leads to a quick action of the relay.
Check that all bulbs are connected and working properly. Or there is no disconnection in one of the winker wires.
 
1 - 3 of 3 Posts
Top