[jw8705]

I was curious if anyone is using a motorcycle jack to lift the bike up to work on it. We rigged one up and it made doing the valve clearance check and shim replacement MUCH easier. With the exhaust below the frame, most typical jacks will not work. Any help would be great.

 

[Nor-Cal CBR 250r]

I use bike stands and they work good

 

[Aufitt]

I simply use a trolley jack with some rubber on it under the suspension linkage to lube the chains on my sportbikes on my own, saves having to ask a mate to lean it over for me... but a dedicated racxe stand is good if you want to spend the $.