[bjende]

A little backstory, I wanted to remove the passenger handles but I didn't want the gap, so I designed some block off plates that bolt onto the same holes as the stock handles do. Anyone interested in buying a set feel free to comment. Pics attached. The black material is petg which can handle all the oil, water, and uv that a bike needs to handle. the white material I was just using to prototype. So the actual plates are black. Thanks!

 

[SavannahCBR]

Any interest in sharing the files with fellow makers? Preferably STEP.

 

[Tamir]

... I designed some block off plates that bolt onto the same holes as the stock handles do. Anyone interested in buying a set feel free to comment. Pics attached.

Good job thanks for sharing, but list how much you're asking for a pair. And there are also friends from all over the world here, do you only shipping in the US? How much for shipping?
[I'm asking in general, I personally don't want to take the handles off]

Any interest in sharing the files with fellow makers? Preferably STEP.

Good thought, but...if bjende has invested effort, he has the right to ask a pay for his work. Listen, if you are a hobbyist, and if you have a 3D production machine, what's the problem if you make a file that will be yours and then you will share it with us (The Windows 10 software for building 3D models, is it make a valid format for you?).
And I can add, in my opinion there is no problem in sharing, because:

• Not many people are interested in removing the handles,
• It's already an old model,
• And even fewer have a machine for making 3D models at home.

Ask bjende in private, maybe he will agree?

 

[bjende]

For of all, thanks, honestly the post was half just to show off a solution to a very specific problem it seems like some people have on here and there really doesn't seem to be an existing solution for. Second of all, In terms of sales, I was more of feeling out what sort of interest people may have in these. Anybody feel free to message me directly if you'd like to work out purchasing and shipping though, as I do have everything needed to makes some more, on hand. Thanks!

 

[SavannahCBR]

Good job thanks for sharing, but list how much you're asking for a pair. And there are also friends from all over the world here, do you only shipping in the US? How much for shipping?
[I'm asking in general, I personally don't want to take the handles off]

Good thought, but...if bjende has invested effort, he has the right to ask a pay for his work. Listen, if you are a hobbyist, and if you have a 3D production machine, what's the problem if you make a file that will be yours and then you will share it with us (The Windows 10 software for building 3D models, is it make a valid format for you?).
And I can add, in my opinion there is no problem in sharing, because:

• Not many people are interested in removing the handles,
• It's already an old model,
• And even fewer have a machine for making 3D models at home.

Ask bjende in private, maybe he will agree?

Eh, as far as the maker world is concerned you ask first pay if they refuse lol. I would even be down for a trade. It is more like, I could take the time but since it has been done, why lol. I have designed about 15 parts for this bike to clean up wiring, house/hide aftermarket electronics, etc.

 

[Tamir]

I have designed about 15 parts for this bike to clean up wiring, house/hide aftermarket electronics, etc.

Sounds very interesting, I would love if you will kindly upload for us a pictures of all your special DIY items.
Do you have a solution for installing a voltmeter on the dashboard? How to do it the right way?
I have this one[LINK to aliexpress]: