Honda CBR 250 Forum banner
1 - 1 of 1 Posts

·
Super Moderator
Joined
·
6,949 Posts
You can't use an inexpensive, garden variety 3/8" drive torque wrench to tighten small bolts at a 7 ft-lbs. spec... those wrenches simply won't be accurate at such a low torque value.

For any of those crankcase cover bolts calling for 7 ft-lbs., the best route is to use a 1/4" drive ratchet with a socket to hand tighten them.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top