Honda CBR 250 Forum banner

Wheel scrubs ground while on stand

7513 Views 35 Replies 12 Participants Last post by  roberthood
Ok, so I noticed while I started cleaning my chain with the rear wheel suspended on the rear stand, in two spots, about 4-5 inches apart, the wheel scrubs the ground. As I turned it, it would lightly scrub in two separate spots right in the middle of the tire. Not enough to lock up the wheel, but enough to where you could see and hear it and obviously tell it was making contact with the garage floor. I know for a fact I never hit anything that would have caused any damage to the rim or axle so....any thoughts?

My garage floor is level. Tire pressure? I've never seen a wheel do this before, especially one that has never had any substantial impact.
1 - 2 of 36 Posts
When someone has made one thread per mile in the 'problems and issues' section........
That's the pot calling the kettle black if I have ever seen it & the most ironic post I have ever seen..especially coming from the CBR250R forums all time highest poster..98% of which is utterly useless smarta$$ remarks just like the one above.
I could care less how many thanks I have showing..or what YOUR opinion is of it even less....I have had hundreds of thank yous in private messages since I have been a member in here..Now go stick your nose in somebody elses business
1 - 2 of 36 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.