Year Make Model Topic Be Descriptive!Rimshotz Reflective Rim kit
1 - 2 of 2 Posts
found a couple pics of other bikes with reflective tape kits on there rims
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
ABS caliper on a non-ABS bike
CBR250 PerformanceWhile the overall braking of the CRB250 is acceptable I am quite disappointed with the lack of feel (wooden block comes to mind). I will likely try SS lines but since I like doing things just to do them I thought about installing the ABS caliper, with it's three pistons, on the stock master...- 32
- 6K
-
How FAST can you go?
CBR250 Performancei haven't tested my bike yet, just for daily use no more than 65km/h (40mph). But i want to know how fast can you ride CBR250 on the road with standard specification? i just wanted to know, cause is the result is different from one rider to another. thanks in advance.:)- 499
- 112K
-
HSR01 · updated
-
ABS Wiring Delete
CBR250 PerformanceI would like to know if anyone has deleted the wiring for the abs from a cbr250. The reason I ask is I have a hybrid , cbr motor in a 125 frame, running on stock cbr250 wiring loom when I have test risen it it does not seem to want to accelerate! I was thinking it may be to do with the abs and...- 1
- 161
-
New Michelin Pilot Street Radial for the CBR250R.
CBR250 PerformanceAt 5500 miles, I'm thinking about new tires. I think the IRC Road Winner RX-01's have been superb, but I don't want to overlook other tires that might be as good or better. I'm under the impression that the CBR250R should be fitted only with bias ply tires. This relatively new video from...- 198
- 66K
-
Stichill · updated
-
rear shock spring too stiff... is it just my butt?
CBR250 PerformanceRear shock spring too stiff... is it just my butt? I weigh 174 pounds, and I found the number two spring setting to be cruely harsh, and the softest setting is only marginally acceptable to me. A softer-yet setting would be nice, and it's hard to imagine riders closer to a hundred pounds don't...- 50
- 10K
-
Turbo DV8 · updated
Join now to ask and comment!